Description
This pulley should provide ~7 lbs more boost pressure than the standard pulley. This is not for the faint of heart. It will spin the supercharger at it’s limit for those wanting to push it.
Unless you are 10,000 feet elevation, you will need a good head gasket and head studs to hold this kind of pressure, and you better be sure you have your tuning dialed in. Our Remote Tuning Session can help get you there!
For the safety of your engine, please note:
- Running higher boost pressure may require adjustments to your tuning (timing and fuel). A tuning cable is available here.
- Your fuel system and ignition system must be operating properly. We have tune-up kits available here.
- We recommend staying under 9 lbs of boost; we have reports that stock head bolts stretch at ~10 lbs, and stock head gaskets leak ~12 lbs.
- Installing an AFR gauge (available from us here) is a very good idea to have so you know that your air/fuel ratio is within a safe zone and will allow us to help you make any necessary adjustments. Please contact us to schedule a free tuning session.
And if you have any questions whatsoever, please never hesitate to contact us! We are here to help you!
Diameter: 2.36″
Reviews
There are no reviews yet.